The program loader ChipLoader (version 1.97.7) is read / write FLASH and EEPROM memory of the following electronic control units (ECU):

January-5.x;

January-7.2;

VS-5.1;

Bosch M7.9.7, M7.9.7+;

Mikas-7.1;

Mikas-7.6;

Bosch ME 7.1;

Bosch ME 7.5;

Also, this program can be used when reading and writing FLASH memory of ECUS:

Mikas-10.3 (in this case, it is possible to read or write via diagnostic connector);

Mikas-10.3+ (Mikas-11) (in this case, it is possible to read or write via diagnostic connector);

Bosch ME 7.5.10;

Mikas-11 (GAZ);

VS-8;

January-7.2+;

Kefico M 7.9.7;

Bosch M 7.9.8 (Kia, Hyundai);

Bosch ME 7.9.7;

Bosch ME 7.9.9 (Chevrolet Captiva);

Bosch MP-7.0 (read / write field calibrations, the record FullFlash ECU);

Siemens 5WY SIMK41, SIMK43 (2 connectors, cars KIA, Hyundai)

Siemens 5WY SIMK31 (2 connectors, cars Chery QQ)

Siemens 5WY (5 connectors, cars KIA, Hyundai)

Siemens EMS 3132 (Renault, Dacia)

Siemens MS43 (BMW)

Sirius (Daewoo, Chevrolet)

The above Electronic Control Units installed on cars of such brands: VAZ, GAZ, Daewoo Sens, Daewoo Lanos 1.4, ZAZ, Daewoo, Chevrolet, Hyundai, Kia, Chery, Geely, Renault, Dacia, Volkswagen, Audi, Skoda, Seat, BMW.

Here are the main features of this program:

- Feature added protection from reading (only for ECU in January-5.x, VS-5.1).

- Read or write dual-mode SOFTWARE (for those ECUS that support this function).

- Remove immobilizer (only for ECU in January-5.x, VS-5.1).

- Transfer the ECU into diagnostic mode with the ability to automatically start the diagnostic program.

- Work with database of user files.

- Possibility of integration in the program ChipExplorer.

- Expandable functionality through the use of plugins.

- Work with different formats firmware.

- Function test K-Line adapter.

Program adapted to run on netbooks.

- Extension of functionality through the use of external plugins:

- Restore the dump of EEPROM memory of ECU Mikas-7.6

- Copy information Immo ECU Siemens 5WY, Sirius, Siemens EMS 3132

- Determine the version of SOFTWARE (for ECU family in January-5.x, VS-1, Mikas-7.x)

- Program works with K-Line adapter (as COM, and USB), which package is not included and can be purchased separately.

Version: 1.97.7









Similar Threads: